Solar an electron imbalance between the front and

Solar power is the transformation of solar energy into electricity . Solar energy is a very important renewable energy. Renewable energy is energy can get from renewable resources, which are naturally replenished on a certain period, such as  sunlight, wind, rain, tides, waves, and geothermal heat. Solar energy is a highly appealing source of electricity because of its  large magnitude. We can have solar power directly  using photovoltaics (PV) or indirectly using concentrated solar power (CSP) , or a combination. A photovoltaic cell (PV), is a device that converts light into electric current using the photovoltaic effect. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The sun emits photons (light), which generate electricity when they strike a photovoltaic cell. In the same way a photovoltaic cell, made from a semi-conducting material, is a device that converts light into electricity. Solar cells are made of silicon consisting of two or more thin layers of semi conducting material, usually silicon. The layers are given opposite charges – one positive, one negative. When sunlight strikes the solar cell, electrons are knocked loose and move toward the treated front surface of the solar cell. This creates an electron imbalance between the front and back of the cell and causes electricity to flow – the greater the intensity of light, the greater the flow of electricity.Concentrated solar power systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. A wide range of concentrating technologies exists, such as the parabolic trough, the compact linear Fresnel reflector and the solar power tower. Different techniques are used to track the sun and focus light. A working fluid is heated by the concentrated sunlight for power generation or energy storage in all of these systems .A parabolic trough consists of a linear parabolic reflector that concentrates light onto a receiver positioned along the reflector’s focal line. The receiver is a tube positioned along the focal points of the linear parabolic mirror and is filled with a working fluid. The reflector is made to follow the sun during daylight hours by tracking along a single axis. Parabolic trough systems provide the best land-use factor of any solar technology.The SEGS plants in California and Acciona’s Nevada solar One near Boulder City, Nevada can be the examples. Compact Linear Fresnel Reflectors are CSP-plants which use many thin mirror strips instead of parabolic mirrors to concentrate sunlight onto two tubes with working fluid. This has the advantage that flat mirrors can be used which are much cheaper than parabolic mirrors, and that more reflectors can be placed in the same amount of space, allowing more of the available sunlight to be used. Concentrating linear fresnel reflectors can be used in either large or more compact plants. A solar power tower uses an array of tracking reflectors to concentrate light on a central receiver atop a tower. Power towers can achieve higher efficiency than linear tracking CSP schemes and better energy storage capability than dish stirling technologies. The PS10 solar Power Plant and PS20 solar power plant are examples of this technology. A hybrid system combines PV and CSP with one another or with other forms of generation such as diesel, wind and biogas. The combined form of generation may enable the system to modulate power output as a function of demand or at least reduce the fluctuating nature of solar power and the consumption of non renewable fuel. Hybrid systems are most often found on islands.A project of The International Energy Agency informs that  by 2050, solar photovoltaics and concentrated solar power would contribute about 16 and 11 percent, respectively, of the worldwide electricity consumption, and solar would be the world’s largest source of electricity. In 2000 The United Nations Development Programme (UNDP) found that the annual potential of solar energy was 1500–49000 EJ. This is several times larger than the total world energy consumption of the world, which was 560 EJ in 2012. The Sun emits a tremendous amount of energy, in the form of electromagnetic radiation into space. At Earth’s distance from the Sun, about 1,368 watts of power  fall on an area of one square meter from the Sun .Currently solar power provides just 1% of total worldwide electricity production .However the good news is that the production is increasing at 33% per year.Everyday the demand of energy is increasing, the source of non-renewable energy is decreasing, but we are still unable to excecute the 100% of renewable energy. Hopefully near future will help us to find a way to utilize the renewable energy to reduce the use of non-renewable energy like fossil fuel, petrolium oil and natural gas. The use of solar power will reduce pollution and solve the problem of global warming . Above all ,the proper use of solar power will increase the energy security of the world.